Download ModelDownload Model (Android)Download SourceembedFeedback

About

About

Topics

Measurement of length and time

Description

Play with the Micrometer Model. Test what you've learned by trying the input field.

Micrometers use the principle of a screw to amplify small distances that are too small to measure directly into large rotations of the screw that are big enough to read from a scale. The accuracy of a micrometer derives from the accuracy of the thread form that is at its heart. The basic operating principles of a micrometer are as follows:

The amount of rotation of an accurately made screw can be directly and precisely correlated to a certain amount of axial movement (and vice-versa), through the constant known as the screw's lead. A screw's lead is the distance it moves forward axially with one complete turn (360°). (In most threads [that is, in all single-start threads], lead and pitch refer to essentially the same concept.)

With an appropriate lead and major diameter of the screw, a given amount of axial movement will be amplified in the resulting circumferential movement.

The micrometer has most functional physical parts of a real micrometer.

Frame (Orange)

The C-shaped body that holds the anvil and barrel in constant relation to each other. It is thick because it needs to minimize expansion, and contraction, which would distort the measurement. The frame is heavy and consequently has a high thermal mass, to prevent substantial heating up by the holding hand/fingers. has a text 0.01 mm for smallest division of instrument has a text 2 rounds = 100 = 1.00 mm to allow association to actual micrometer

Anvil (Gray)

The shiny part that the spindle moves toward, and that the sample rests against.

Sleeve / barrel / stock (Yellow)

The stationary round part with the linear scale on it. Sometimes vernier markings.

Lock nut / lock-ring / thimble lock (Blue)

The knurled part (or lever) that one can tighten to hold the spindle stationary, such as when momentarily holding a measurement.

Screw

(not seen) The heart of the micrometer It is inside the barrel.

Spindle (Dark Green)

The shiny cylindrical part that the thimble causes to move toward the anvil.

Thimble (Green)

The part that one's thumb turns. Graduated markings.

Ratchet (Teal)

(not shown ) Device on end of handle that limits applied pressure by slipping at a calibrated torque.

This applet has an object (Black)

with slider on left top to control the y-motion of the object into the anvil and spindle (jaws), the graphics also allows drag action.

with slider on left bottom to control the x-size of the object into the anvil and spindle (jaws).

On the left bottom slider is the zero error control to allow of exploring with if the micrometer has either +0.15 mm (max) or -0.15mm (min) zero error. The are check boxes:

hint: guide lines and arrows to indicate the region of interest plus the accompanying rationale for the answer.

answer: shows the measurement d = ??? mm

lock: allows simulating of the lock function in real micrometer which disable changes to the position of the spindle then by the measurement is unchangeable.

On the bottom there is a green slider to control the position of the spindle, drag on any part of the view also drags the spindle.

There is 2 buttons left and right fine control to allow for single incremental change of the measurement, to allow learners to sense the rotation simulation of the spindle with the many lines to simulate the coarse pattern to increase friction between fingers and on the thimble and ratchet.

The reset button restores learning environment to default setting

Research

arXiv:1408.3803 [pdf]
Vernier caliper and micrometer computer models using Easy Java Simulation and its pedagogical design feature-ideas to augment learning with real instruments
Loo Kang Wee, Hwee Tiang Ning
Comments: 8 pages, 8 figures, Physics Education journal
Subjects: Physics Education (physics.ed-ph); Instrumentation and Detectors (physics.ins-det)
https://youtu.be/jHoA5M-_1R4


https://youtu.be/I-RZxhyZVio

Sample Learning Goals

(g) describe how to measure a variety of lengths with appropriate accuracy by means of tapes, rules, micrometers and calipers, using a vernier scale as necessary.

Version:



  1. http://weelookang.blogspot.sg/2015/07/ejss-micrometer-model.html?m=1
  2. http://weelookang.blogspot.sg/2010/06/ejs-open-source-micrometer-java-applet.html 
  3. http://iwant2study.org/lookangejss/01_measurement/ejs/ejs_model_Micrometer02.jar
  4. http://www.phy.ntnu.edu.tw/ntnujava/index.php?topic=567.msg2364#msg2364
  5. http://www.phy.ntnu.edu.tw/ntnujava/index.php?topic=683.msg2451#msg2451
Blackbody Radiation 

Micrometer Model.

Micrometer

Micrometers use the principle of a screw to amplify small distances that are too small to measure directly into large rotations of the screw that are big enough to read from a scale. The accuracy of a micrometer derives from the accuracy of the thread form that is at its heart. The basic operating principles of a micrometer are as follows:
The amount of rotation of an accurately made screw can be directly and precisely correlated to a certain amount of axial movement (and vice-versa), through the constant known as the screw's lead. A screw's lead is the distance it moves forward axially with one complete turn (360°). (In most threads [that is, in all single-start threads], lead and pitch refer to essentially the same concept.)
With an appropriate lead and major diameter of the screw, a given amount of axial movement will be amplified in the resulting circumferential movement.
The micrometer has most functional physical parts of a real micrometer.

Frame (Orange)
The C-shaped body that holds the anvil and barrel in constant relation to each other. It is thick because it needs to minimize expansion, and contraction, which would distort the measurement. The frame is heavy and consequently has a high thermal mass, to prevent substantial heating up by the holding hand/fingers. has a text 0.01 mm for smallest division of instrument has a text 2 rounds = 100 = 1.00 mm to allow association to actual micrometer

Anvil (Gray)
The shiny part that the spindle moves toward, and that the sample rests against.

Sleeve / barrel / stock (Yellow)
The stationary round part with the linear scale on it. Sometimes vernier markings.

Lock nut / lock-ring / thimble lock (Blue)
The knurled part (or lever) that one can tighten to hold the spindle stationary, such as when momentarily holding a measurement.

Screw
(not seen) The heart of the micrometer It is inside the barrel.

Spindle (Dark Green)
The shiny cylindrical part that the thimble causes to move toward the anvil.

Thimble (Green)
The part that one's thumb turns. Graduated markings.

Ratchet (Teal)
(not shown ) Device on end of handle that limits applied pressure by slipping at a calibrated torque.

This applet has an object (Black)
with slider on left top to control the y-motion of the object into the anvil and spindle (jaws), the graphics also allows drag action.
with slider on left bottom to control the x-size of the object into the anvil and spindle (jaws).
On the left bottom slider is the zero error control to allow of exploring with if the micrometer has either +0.15 mm (max) or -0.15mm (min) zero error. The are check boxes:
hint: guide lines and arrows to indicate the region of interest plus the accompanying rationale for the answer.
answer: shows the measurement d = ??? mm
lock: allows simulating of the lock function in real micrometer which disable changes to the position of the spindle then by the measurement is unchangeable.
On the bottom there is a green slider to control the position of the spindle, drag on any part of the view also drags the spindle.
There is 2 buttons left and right fine control to allow for single incremental change of the measurement, to allow learners to sense the rotation simulation of the spindle with the many lines to simulate the coarse pattern to increase friction between fingers and on the thimble and ratchet.
The reset button restores learning environment to default setting

Credits:

The Micrometer model was created by created by Fu-Kwun Hwang, customized by Loo Kang WEE, and edited by Wolfgang Christian using the Easy Java Simulations (EJS) version 4.2 authoring and modeling tool.  An applet version of this model is available on the NTNU website < http://www.phy.ntnu.edu.tw/ntnujava/ >.

You can examine and modify this compiled EJS model if you run the model (double click on the model's jar file), right-click within a plot, and select "Open EJS Model" from the pop-up menu.  You must, of course, have EJS installed on your computer.  Information about EJS is available at: <http://www.um.es/fem/Ejs/> and in the OSP comPADRE collection <http://www.compadre.org/OSP/>.

 

For Teachers

ForTeacher

Teacher-Submitted Activities

Translations

Code Language Translator Run
id Indonesian Bahasa Indonesia
zh Chinese 中文

Software Requirements

SoftwareRequirements

Android iOS Windows MacOS
with best with Chrome Chrome Chrome Chrome
support fullscreen? Yes. Chrome/Opera No. Firefox/ Sumsung Internet Not yet Yes Yes
cannot work on some mobile browser that don't understand JavaScript such as..... cannot work on Internet Explorer 9 and below

 

Credits

Fu-Kwun Hwang; lookang; Wolfgang Christian

end faq

http://iwant2study.org/lookangejss/01_measurement/ejss_model_Micrometer02/Micrometer02_Simulation.xhtml

Apps

Get it on Google Play Cover arthttps://play.google.com/store/apps/details?id=com.ionicframework.micrometerapp268865

 https://itunes.apple.com/us/app/micrometer-simulator/id1164367611?mt=8

Topics

Measurement of length and time

Description

Play with the Micrometer Model. Test what you've learned by trying the input field.

Micrometers use the principle of a screw to amplify small distances that are too small to measure directly into large rotations of the screw that are big enough to read from a scale. The accuracy of a micrometer derives from the accuracy of the thread form that is at its heart. The basic operating principles of a micrometer are as follows:

The amount of rotation of an accurately made screw can be directly and precisely correlated to a certain amount of axial movement (and vice-versa), through the constant known as the screw's lead. A screw's lead is the distance it moves forward axially with one complete turn (360°). (In most threads [that is, in all single-start threads], lead and pitch refer to essentially the same concept.)

With an appropriate lead and major diameter of the screw, a given amount of axial movement will be amplified in the resulting circumferential movement.

The micrometer has most functional physical parts of a real micrometer.

Frame (Orange)

The C-shaped body that holds the anvil and barrel in constant relation to each other. It is thick because it needs to minimize expansion, and contraction, which would distort the measurement. The frame is heavy and consequently has a high thermal mass, to prevent substantial heating up by the holding hand/fingers. has a text 0.01 mm for smallest division of instrument has a text 2 rounds = 100 = 1.00 mm to allow association to actual micrometer

Anvil (Gray)

The shiny part that the spindle moves toward, and that the sample rests against.

Sleeve / barrel / stock (Yellow)

The stationary round part with the linear scale on it. Sometimes vernier markings.

Lock nut / lock-ring / thimble lock (Blue)

The knurled part (or lever) that one can tighten to hold the spindle stationary, such as when momentarily holding a measurement.

Screw

(not seen) The heart of the micrometer It is inside the barrel.

Spindle (Dark Green)

The shiny cylindrical part that the thimble causes to move toward the anvil.

Thimble (Green)

The part that one's thumb turns. Graduated markings.

Ratchet (Teal)

(not shown ) Device on end of handle that limits applied pressure by slipping at a calibrated torque.

This applet has an object (Black)

with slider on left top to control the y-motion of the object into the anvil and spindle (jaws), the graphics also allows drag action.

with slider on left bottom to control the x-size of the object into the anvil and spindle (jaws).

On the left bottom slider is the zero error control to allow of exploring with if the micrometer has either +0.15 mm (max) or -0.15mm (min) zero error. The are check boxes:

hint: guide lines and arrows to indicate the region of interest plus the accompanying rationale for the answer.

answer: shows the measurement d = ??? mm

lock: allows simulating of the lock function in real micrometer which disable changes to the position of the spindle then by the measurement is unchangeable.

On the bottom there is a green slider to control the position of the spindle, drag on any part of the view also drags the spindle.

There is 2 buttons left and right fine control to allow for single incremental change of the measurement, to allow learners to sense the rotation simulation of the spindle with the many lines to simulate the coarse pattern to increase friction between fingers and on the thimble and ratchet.

The reset button restores learning environment to default setting  

For Teachers

  1. http://weelookang.blogspot.sg/2012/01/mirror-here-httpssites.html 
  2. https://sites.google.com/site/lookang/002-micrometer?pli=1
 

iCTLT2016 ePosterGuide Example

Video   iCTLT2016 Sample of ePoster by  lookang lawrence wee

Research

arXiv:1408.3803 [pdf]
Vernier caliper and micrometer computer models using Easy Java Simulation and its pedagogical design feature-ideas to augment learning with real instruments
Loo Kang WeeHwee Tiang Ning
Comments: 8 pages, 8 figures, Physics Education journal
Subjects: Physics Education (physics.ed-ph); Instrumentation and Detectors (physics.ins-det)
https://youtu.be/jHoA5M-_1R4

Video

https://youtu.be/YAmn-xksu2s

 
https://youtu.be/I-RZxhyZVio 

 

 Youtube by Kim Kia Tan

 

 Youtube by Kim Kia Tan

Sample Learning Goals

(g) describe how to measure a variety of lengths with appropriate accuracy by means of tapes, rules, micrometers and calipers, using a vernier scale as necessary.

Version:

  1. http://weelookang.blogspot.sg/2015/07/ejss-micrometer-model.html?m=1 by Fu-Kwun Hwang and lookang JavaScript version blogpost
  2. http://weelookang.blogspot.sg/2010/06/ejs-open-source-micrometer-java-applet.html  by Fu-Kwun Hwang and lookang Java version blogpost
  3. http://iwant2study.org/lookangejss/01_measurement/ejs/ejs_model_Micrometer02.jar by Fu-Kwun Hwang and lookang Java version digital library
  4. http://www.phy.ntnu.edu.tw/ntnujava/index.php?topic=567.0 by Fu-Kwun Hwang and lookang Java version
  5. http://www.phy.ntnu.edu.tw/ntnujava/index.php?topic=683.0 by Fu-Kwun Hwang Java version
  6. http://www.phy.ntnu.edu.tw/ntnujava/index.php?action=post;topic=502.0 by Fu-Kwun Hwang Java version mirror here

Other Resources

  1. http://www.vjc.moe.edu.sg/fasttrack/physics/macrometer_ya_v6.htm by VJC requires Flash
  2. http://www.upscale.utoronto.ca/PVB/Harrison/Micrometer/Flash/FullAnimation.html Animation
  3. http://www.upscale.utoronto.ca/PVB/Harrison/Micrometer/Flash/MicSimulation.html Animation

end faq

4.91176470588 1 1 1 1 1 1 1 1 1 1 Rating 4.91 (17 Votes)